[Elecraft] (K3) Programmers code

[Don Wilhelm]

  If you look at the K3 Programmer's Reference, you will find the "KY" 
command.
The information in that manual will give you the syntax and other info 
you need to know.

Unless you are writing your own software, I suggest that you try it from 
the K3 Utility terminal window.

73,
Don W3FPR

On 7/14/2011 8:20 PM, N6MQL wrote:
> Does anyone know the programmers reference code that I should send to
> the RS232 in order to key the rig in CW mode.  DM780 is capable of
> sending CW without using a WinKey or other external device. I would like
> to know what command is being sent to do that.  Thank you Feel free to
> email direct if you like.
>