[Elecraft] RX only Ant Select Problem

[Don Wilhelm]

  Dick,

Do you have the SubRX Aux Antenna connector cable going to the KAT3 or 
to the rear panel BNC connector.  The menu is set according to how the 
physical installation is wired.
If you have a factory built K3 (and you have not changed it), the cable 
to the AUX BNC jack is connected (and you were shipped a TMP cable to 
use if you wanted to change it).

73,
Don W3FPR

On 7/11/2011 3:01 PM, Dick wrote:
> Have RX ant to Aux BNC.  Under config have KRX3 = BNC, according to
> manual. Not working. What am I missing in the setup and of config? Front
> panel select options?
>
> TIA  Dick
>