[Elecraft] k2 clicking

[John Cooper]

ok the relay that switches the high power was clicking because the fuse in 
the rig runner was bad replaced that stopped clicking think problem in kat 
100

-----Original Message----- 
From: John Cooper
Sent: Thursday, July 07, 2011 5:36 PM
To: don at w3fpr.com ; elecraft
Subject: Re: [Elecraft] k2 clicking


kpa100 shows e 12 on error list
-----Original Message----- 
From: John Cooper
Sent: Thursday, July 07, 2011 5:13 PM
To: don at w3fpr.com ; elecraft
Subject: [Elecraft] k2 clicking

Left k2 hooked during storm now acts funny. Have the k2 with amp and tuner
in ec2. Tuner tunes but leds on kat100 don’t light up. Also shows hi curr on
screen. KAT100 shows error code E243. When kpa100 switched something starts
clicking one of the relays not sure which one yet. kat2 tuner shows no
errors just when kat100 hooked up.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html