[Elecraft] [P3] Beta 1.08 bug?

[Jim McDonald]

Understood!  Thanks, Mike.

I could and should use that mode for split-frequency pileups, and I tried on
a "foreign" mode, PSK.

Jim N7US



-----Original Message-----

Hi Jim,

I'm using 1.09 but I believe this will also apply to 1.08. If VFO A is on
the left side of the screen then you must be in Fixed-Tune mode. In that
mode, the left frequency display shows the lower frequency limit. The right
display shows the upper frequency limit. The center display shows the K3
frequency. So if the K3 frequency happens to also be 14070.0 then the center
display will be the same as the left display. If you move VFO A you will see
the center display change while the left and right displays remain fixed.

73,
Mike K2MK


N7US wrote:
> 
> I was experimenting with moving the VFO A frequency to the left side of
> the
> display for PSK (a mode I don't normally use) and think I found a bug.
> 
> I set the span to 4 kHz, and the left side of the display shows the
> correct
> VFO A frequency, 14070.0, and the right side correctly shows 14074.0, but
> the center shows 14070.0 instead of 14072.2.
> 
> I saved a screenshot of the display with P3 Utility in case anyone wants
> to
> see it.
> 
> Jim N7US