[Elecraft] P3 RS232

[Don Wilhelm]

  Roger,

Tune lower - the K3 IF center is at 8215 kHz.  Make certain your P3 is 
also set to the K3 center frequency.

73,
Don W3FPR

On 7/4/2011 11:13 AM, Roger Banks wrote:
> I can find an output from the K3 with the R20 at about 8.580. If I set a user
> if to that and plug the P3 in then I get a display with a couple of peaks at
> -105db . However, it is not the main IF output as you can tune off it and
> nothing else is visible.
> The P3 will show the random noise floor at -165dB using scale.
> Roger
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/P3-RS232-tp6545130p6546481.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>