[Elecraft] securing toroids in K2, why not?

[vr2xmc]

U don't need all those adhesive for all toroids. 73 Johnny 

Sent from my  iPhone 4

R Thompson <ve8rt at xplornet.com> 於 2011年7月3日 上午9:02 寫道：

>   I just installed the first toroid, RFC14, in my K2 kit.  After
> winding it, I sprayed it with conformal coating, and just before
> installing it I put a small dab of RTV3145 (non-corrosive) silicone seal
> on the end next to the PC board and then soldered it in place.
> 
>   So.... I turn the page in the manual and the very next thing in bold
> is "Do not use adhesives or fixatives of any king to secure toroids to
> the PC board.
> 
>   Would this also apply to conformal coating?  Should I remove RFC14
> and take the RTV off it?
> 
>   Thanks,
> 
>             Ron VE8RT
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html