[Elecraft] jt65 help with k3 after xp software reinstall

[Tony Estep]

Hmmmm, sounds confusing, Don. Well, first let's make absolutely sure your
clock is right. Click "change time and date settings" to get a
second-by-second update. Then go to:

http://www.time.gov/widget.html

and make sure your time matches.

If the time is correct and you're transmitting some power, the next thing to
check is to make sure that the audio output of JT-65 is reaching your
transmitter. An easy way to do this is to set the K3 meter to show ALC; then
while transmitting, use the Windows volume control to keep advancing speaker
volume and watch the ALC bars. When you get it to 6, back off about 1 1/2
bars.

At that point, you are definitely sending properly synced JT65 -- at least I
can't think of any reason why not.

Tony KT0NY


On Fri, Jul 1, 2011 at 7:51 PM, <goldtr8 at charter.net> wrote:

> Hi Tony,
>
> I have reinstalled the clock sync software several times and tried multiple
> clock sync software.
>
> The decodes are spot on but no one responds.....
>