[Elecraft] P3 Beta v1.05 anomaly?

[gary bartlett]

Gene, if you haven't done so, write down your menu setting then do the
parameter re-initialization as per Page 26 of the current Manual on the
Elecraft Website.

I had the same problem as yours, plus a whole lot more, when I did a
download of 1.05.  They all went away with the parameter reset (a suggestion
which came from Alan N1AL) and my P3 has been stable ever since.

That is a simple procedure that probably we should all remember exists.  I
unnecessarily fought with my P3 for 48 hours during ARRL DX CW contest
because I had forgotten that a potential fix was easily available to me.

	73,

	Gary, VE1RGB

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gene Sochor
Sent: February 28, 2011 11:36 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] P3 Beta v1.05 anomaly?

Since installing version v.1.05 beta firmware in my P3 I've noticed 
that any function I assign to the FN7 HOLD key gets erased whenever 
the P3 gets powered-off.  FN7 TAP assignments, as well as all other 
function key TAP or HOLD functions, are not effected by powering 
off.  Anyone else see that?

73, Gene N9SW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html