[Elecraft] My K3 forgets where it's at on DC failure

[Don Wilhelm]

  Nick,

A quicker way to accomplish the same thing is to do a band change, then 
change back.  The K3 stores the current frequency and mode when the band 
is changed.

The K3 does store the current frequency after it has not been changed 
for some period of time - I believe that time is 30 seconds.

73,
Don W3FPR

On 2/28/2011 8:11 AM, Nick-WA5BDU wrote:
> My MFJ-4225V power supply sometimes trips off when I'm operating in 160M
> contests, giving me the same problem.
>
> If I'm "running" stations (calling CQ), after establishing a frequency
> I'll power the K3 off normally, then back on.  Now if the P/S trips the
> K3 will come back up on the current frequency.
>
> 73-
>
> Nick, WA5BDU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>