[Elecraft] P3, what lies ahead?

Jack Brabham kz5a at att.net
Sat Feb 26 14:36:50 EST 2011


There was a comment by Wayne on a recent similar thread which intimated 
that some level of P3 integration with the station PC is being 
developed, or at least that is what I read into the comment.

I expect to purchase a P3 at some point, but am inclined to wait until 
the product matures a bit and the level of functionality improves.   In 
particular, I'm looking for the ability to port the display to the PC so 
I can enlarge it enough to be readable with my old eyes and the ability 
to do point and click tuning.

Actually, a no display, PC only version of the P3 would be very 
interesting, especially if it got a little less expensive in the process 
of loosing it's local display and knobs.


73 Jack KZ5A

K3 #4165







On 2/25/2011 3:26 PM, Bill Conkling wrote:
> Thanks, Don.
>
> I did not know this.
>
> ...bill   nr4c
>
> -----Original Message-----
> From: Don Wilhelm [mailto:w3fpr at embarqmail.com]
> Sent: Thursday, February 24, 2011 6:12 PM
> To: nr4c at widomaker.com
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] P3, what lies ahead?
>
>    If you are using a filter width that is greater than about 1.5 times
> your sidetone pitch, the filter must not be centered at your CW pitch -
> it must be skewed so that you do not receive the opposite sideband.
> That offset is done automatically in the K3.
>
> 73,
> Don W3FPR
>
> On 2/24/2011 12:29 PM, nr4c at widomaker.com wrote:
>> Now, I managed to smooth out my filter gains by using Hamscope which
>> is an audio spectrum visualization tool.  This worked pretty well.
>>
>> Funny thing, my 200Hz fileter with a -86Hz offset is pretty well
>> centered about the centerline, but my 400 Hz 8-pole with 0 offset, is
>> way off center!  So are the 1.8 and 2.8 filters.  What gives....?
>>
>>
>> ...bc   nr4c
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the Elecraft mailing list