[Elecraft] MH2 Microphone issue

[KA1YMX]

All of the jumpers are installed. I measured the voltage on pins 1 and 6 and
the voltage is approximately 3.1 vdc. I can still use the K2 with the
Pro-Set and it works fine. The MH2 does not work even though the KSB2 manual
says the configuration is the same.
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/MH2-Microphone-issue-tp6064358p6064593.html
Sent from the [K2] mailing list archive at Nabble.com.