[Elecraft] Sub RX upgrade

[nr4c at widomaker.com]

Well, it seems to me that while you only need one FM or AM to  
transmit, if you want to hear AM and FM in diversity mode, you will  
have to have matching filters for both receivers. And if stations  
outside the ham bands are desired, you will need the wide-band module  
as well on the sub-receiver.

I'm looking at the same thing as I have now filled all the 'holes' in  
my K3 and am drooling over the sub-receiver. I'm gonna have to buy  
three additional filters plus the 5>8swap at purchase. But I will draw  
the line at the wide coverage and 6kHz filter. I think I can live  
without them being duplicated.

...bill nr4c


Quoting N1IRB <N1IRB at COX.NET>:

>
> I am getting ready to add the second RX to my K3. I notice that the order
> page says that only one AM and FM filter is required in my radio for the TX
> side. So my question is when using the divirsity mode to listen to say a
> shortwave station I don't need an AM filter on the subRX? My second question
> is do I need the gen coverage module for said scenario if outside of the ham
> bands?
>
> Thanks for any help
>
> Scott - N1IRB
> K3 S/N 4555
> --
> View this message in context:  
> http://elecraft.365791.n2.nabble.com/Sub-RX-upgrade-tp6064059p6064059.html
> Sent from the [K3] mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>