[Elecraft] KPA100 SO-239 Help

[david]

Mine was the same way.  No worries, it will be fine.

73,

David AJ4TF

> 
> ------------------------------
> 
> Message: 13
> Date: Thu, 24 Feb 2011 14:18:11 -0600
> From: "John Cooper" <wt5y at gt.rr.com>
> Subject: [Elecraft] KPA100 SO-239 Help
> To: "elecraft" <elecraft at mailman.qth.net>
> Message-ID: <2B954EFE7E5E49CCB2319FF78C6FE878 at WT5YPC>
> Content-Type: text/plain;	charset="iso-8859-1"
> 
> Ive installed J2 (so-239 antenna connector) on the rear panel of the kpa100 and soldered the red and black jumper wires along with the component lead.  After I noticed the inside connector and the red dialectric foam spins freely inside of the outer threaded shell of the connector.  Is this ok or do I need to replace this so-239?  
> 
> John WT5Y  
>