[Elecraft] FW: FW: K3: KPA500 on a generator?
Brendan Minish
ei6iz.brendan at gmail.com
Fri Feb 18 15:41:58 EST 2011
It should be fine, about the only thing you may need to do is put a
couple of hundred watts of base load on it or it may not run very
smoothly with the big changes in load that will go with keying
This would apply with any linear mind you
On 18/02/2011 18:36, David Cutter wrote:
> Thanks, Jim, got the message.
>
> Now, I would like to use the K3+KPA500 with an unused Briggs and Stratton
> 2kVA generator that I fancy for portable work. It's probably the last of
> the "old style" ie no inverter technology. I don't expect Elecraft to test
> their kit with all and sundry generators that were ever built, but there
> might some lore about VA ratings and on/off ratios.
>
> Any advice welcome.
>
> David
> G3UNA
>
>
>
>
>
>> On 2/18/2011 1:05 AM, David Cutter wrote:
>>> This is of interest to me, but is there an implication that the K3 +
>>> KPA500
>>> MUST have an "advanced inverter technology" generator - providing "stable
>>> power for computers and more" variety of modern generator?
>>
>> NO! The issue is the GENERATOR being happy and running well with a
>> pulsed load current that is a fairly high percentage of its rated
>> current. My much bigger Honda EU6500 will run a LONG time in economy
>> mode with SMALL loads, but will stagger to its knees with the heavy load
>> of well motors. To run those pumps, which cycle on and off periodically,
>> I have to run the generator in "Normal" mode, which burns a lot more
>> petrol.
>>
>> See my earlier post about using a 2000i on a CQP expedition with a 500W
>> amp. It ran just fine, and I'm sure that the gen would be equally happy
>> with the KPA500.
>>
>> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
--
73
Brendan EI6IZ
More information about the Elecraft
mailing list