[Elecraft] Microham Micro Keyer II

[Joe Subich, W4TV]

 > As it is now my Micro keyer is plugged into the auxiliary
 > port on the K3.  How will the auxiliary port be shared between the
 > KPA-500 and the Micro keyer, a 'Y' cable?

Yes, an 'all 15'  Y-cable will do the job.

However, the microHAM interfaces only use FSK and PTT on the AUX
jack so it might be possible to make a simplified "Y" cable or
replace the "Y" with a break-out board like those from Winford
Engineering.

73,

    ... Joe, W4TV


On 2/15/2011 9:37 PM, Richard Thorne wrote:
> I only have the K3 at this time but it looks like I'll be ordering a P3
> and KPA-500.
>
> I've looked at the pic's W4TV posted and have a pretty good idea how
> everything will interconnect.  I am curious about the auxiliary
> connection.  As it is now my Micro keyer is plugged into the auxiliary
> port on the K3.  How will the auxiliary port be shared between the
> KPA-500 and the Micro keyer, a 'Y' cable?
>
> Looking forward to the new amp.  We're finally starting construction of
> our new QTH which allows for towers, dirt work begins tomorrow.
>
> Thanks in advance.
>
> Rich - N5ZC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>