[Elecraft] AFSK -> PSK problem

[Don Wilhelm]

  Joe,

The mode/submode are per band settings.  If you did not have your Data 
Mode set to AFSK-A fo all bands that you would be operating using AFSK, 
then the results are as to be expected.

In other words, preset the mode and submode prior to a contest.

73,
Don W3FPR

On 2/13/2011 10:32 PM, Joe wrote:
> During the WPX RTTY contest this weekend I have noticed that my K3 will jump
> from AFSK A to PSK D.  It happens whenever I change bands.  I know it
> happens at other times but did not note the circumstances during the
> contest.  Anyone else notice this?  Any ideas?
>
> Other than this my K3-P3/N1MM/MMTTY configuration works great.  With the P3
> I did not even have to have the phones on just watched and tuned to the
> scope display.  I only got a couple of hundred Q's. It was not a serious
> effort and I just picked low hanging fruit ;o}
>
> 73 Joe K2UF
>
> No trees were harmed in the sending of this e-mail; however, many electrons
> were inconvenienced.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>