[Elecraft] [K2] HiCur problem

[Brian Denley]

I am getting hi current message into a 50 ohm dummy load for any setting 
over 1 watt (even 1 watt is drawing well over 3 amps).  If I try to set the 
power output higher, the K2 clicks off and resets.  In previous tests, I 
could put 10 watts into the same load with out any problem.  Any ideas on 
where to look would be appreciated.
Thanks
Brian
KB1VBF
http://home.comcast.net/~b.denley/index.html