[Elecraft] Macro 101 for DM780

[Matt Zilmer]

If you bring up the K3 Utility and punch the Help menu, Dick's set up
a very thorough macro help page.  It contains many examples, some of
them contributed by the Field Test group.

The part of the Help system you want is called
"Command Tester / K3 Macros".

Might give that a try.  It is quite extensive.

73,
matt W6NIA

==


On Sat, 12 Feb 2011 11:08:34 -0500 (EST), you wrote:

>Dear List,
>
>I have figured out how to send some button commands to the K3 from the 
>radio panel in DM780 which is tied to HRD.
>
>What I do on digital mode is go to my widest filter to find a signal 
>that I want to work.  Then when on it I push the I/II button to go to 
>filer II where I have a narrow setting to eleminat the side signals.
>
>What I would like to do is built some specfic filter macros in DM780 to 
>select mutliple filter widths.  To take advangate of the DSP ability to 
>make almost any filter witdh that I want.
>
>Unfortunatly, it apears that my macro ability is equal to a "box of 
>rocks" .  At least I admit it, however once I get it, it sticks.
>
>I did find macros that folks wrote for other radios, but I can not for 
>the life of me figure out how to modify them for the K3.  So I am 
>looking at other places just with no luck.
>
>So please thanks in advance for the help.
>
>Don
>KD8NNU
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html