[Elecraft] K2 Removal of DSP module

[Don Wilhelm]

  Yes, two wire jumpers are needed.  One between CB J1 pin 1 and J2 pin 
1 - the other between J1 pin 2 and J2 pin 2.  The original jumpers were 
soldered, but component leads bent ans stuck into the J1 and J2 headers 
will work quite nicely.

73,
Don W3FPR

On 2/10/2011 4:42 PM, W2bpi1 at aol.com wrote:
> If I were to remove the DSP module, what would I need to do to return the
> K2 to operate without it? Perhaps a couple jumpers?   Tnx  Geo/W2BPI
>