[Elecraft] HRD PSK31 w/K3

[Greg]

If you are talking about rig control you have to run HRD.  When you first
run it you will get a connection screen.  Set up your COM port there and
connect.

Then in DM780 for PTT you probably want to click connect through HRD. When
the Radio window is open in DM780 click connect.

73
Greg
AB7R


On Sat, Feb 5, 2011 at 4:30 PM, Richard Ferch <ve3iay at storm.ca> wrote:

>
>
> n7za wrote:
> > Anyone using Ham Radio Deluxe  with the K3 for PSK31?
> >
> > I loaded it and clicked on DM780. The only thing I see is to set it up
> > with a sound card.
> >
> > How do you set it up to talk with the serial port? The radio controls
> > work OK.
>
> You don't. AFAIK the only software that will use the K3's serial port
> without a sound card for PSK31 (in PSK D mode) is software that was
> written specifically for the K3 (such as Elecraft's K3 Utility or
> G4ILO's KComm). General-purpose PSK31 software like DM780 uses a sound
> card to generate PSK31. You have to put the K3 in an audio mode such as
> DATA A and feed the sound card audio into the K3's LINE IN jack or a
> microphone input to use this software for PSK31.
>
> 73,
> Rich VE3KI
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>