[Elecraft] KX3 jacks and connections

[Mike Schwendeman]

Wayne;

I do understand that the PTT function is indeed available at the mic 
connector on the KX3 radio.  You have mentioned "...PTT function comes 
out to one of the 4 pins..."

But...  On which of the "four circuit" points on the 4-circuit 
connector?  From way back to my original post and reference, the PTT 
function is (apparently) not available to a 3-circuit PLUG.  -It is 
allowed or is available to a 4-circuit plug, however; -Or, at least, 
this is how I understood it to be.  Maybe I am simply not understanding 
this small point.  (If this is indeed the case, please forgive my 
ignorance.)

73;   -Mike-   KØJTA

On 12/30/11 3:23 PM, Wayne Burdick wrote:
> Mike Schwendeman wrote:
>>
>
>> I really do appreciate your willingness to consider new developments 
>> or modification!  (Again, to ME, the connector's up-down feature is 
>> really nifty, but it has an obviously LOWER need, therefore PRIORITY, 
>> when one considers the PTT function. -Too late for a board mod, at 
>> this point, I am sure...)
>
> I don't think a board mod is necessary. The PTT function comes out to 
> one of the 4 pins, and the UP/DN functions -- on the same pin -- can 
> be disabled in the menu.
>
> 73,
> Wayne
> N6KR
>
>
>