[Elecraft] P3 and K3 VFOB

John Merrill johnn1jm at gmail.com
Sat Dec 17 17:06:49 EST 2011


Yes.



On Sat, Dec 17, 2011 at 3:05 PM, Gary VK4FD <garyvk4fd at gmail.com> wrote:

> **
> Curious....do you have the second receiver installed to do this?
>
> Gary
>
>
> VK4FD - Motorhome Mobile
> Elecraft Equipment
> K3 #679, KPA-500 #018
> Living the dream!!!
>
> ----- Original Message -----
> *From:* John Merrill <johnn1jm at gmail.com>
> *To:* elecraft at mailman.qth.net
> *Sent:* Sunday, December 18, 2011 7:37 AM
> *Subject:* Re: [Elecraft] P3 and K3 VFOB
>
> The more I look at it, it looks like it happens on all bands where VFOs are
> on different bands but maybe only at those spans.
> Of course one could turn of the b VFO marker until the VFOs are on the same
> band :-).
>
> John N1JM
>
> On Sat, Dec 17, 2011 at 2:16 PM, John Merrill <johnn1jm at gmail.com> wrote:
>
> > On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also
> do
> > it with other combinations of VFOs on different bands at 10, 25, and 50
> > spans.
> >
> > John N1JM
> >
> >
> > On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon <w0eb at cox.net> wrote:
> >
> >> The magenta bar actually tracks the KHz digits of VFO B but apparently
> >> only in the instance where the difference frequency between VFO A and
> VFO B
> >> is 7 MHz.  No matter what either VFO is set to, if you set the other one
> >> 7.0 MHz either above or below that frequency, and the P3's SPAN to
> EXACTLY
> >> 25 KHz, the phenomenon occurs.  If SPAN is set to anything other than an
> >> exact 25 KHz (+/- 12.5) the bar disappears.
> >>
> >> Jim - W0EB
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> > Jim:
> >> >
> >> > Glad I am not alone :-). Maybe this is normal or a bug. Hopefully
> >> > Elecraft might chime in on this or I will email support.
> >> >
> >> >
> >> > 73, John N1JM
> >> >
> >> > On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon <w0eb at cox.net> wrote:
> >> >
> >> >> John is correct.  I can duplicate the symptoms here as well and
> >> >> there is no bright center line, only the magenta bar which does
> >> >> move when you move VFO B.  As soon as you configure menu item VFO
> >> >> IND to NO, the line disappears and, of course the two VFO's stay
> >> >> on the same band.
> >> >>
> >> >
> >> >> Jim - W0EB
> >> >>
> >> >> Rick:
> >> >>
> >> >> It's not marker B. I can turn marker B on and off. If someone
> >> >> wants
> >> >> to check
> >> >> it, tune VFO A to 7.160 and B to 14.155 with span set to 25khz.
> >> >> The
> >> >> magenta
> >> >> bar or u shows up to the left of green A. It moves as you tune VFO
> >> >> B. There
> >> >> is no carrier line, however on B as there is for A.
> >> >>
> >> >> John N1JM
> >> >>
> >> >> --
> >> >> View this message in context:
> >> >> http://elecraft.365791.n2.nabble.com/P3-and-K3-VFOB-
> >> >> tp7104075p7104525.html
> >> >> Sent from the Elecraft mailing list archive at Nabble.com.
> >> >> ______________________________________________________________
> >> >> Elecraft mailing list
> >> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> >> Help: http://mailman.qth.net/mmfaq.htm
> >> >> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
> >> >>
> >> >> This list hosted by: http://www.qsl.net
> >> >> Please help support this email list:
> >> >> http://www.qsl.net/donate.html
> >>
> >
> >
> >
> > --
> > sent on my MacBook Pro
> >
>
>
>
> --
> sent on my MacBook Pro
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


-- 
sent on my MacBook Pro


More information about the Elecraft mailing list