[Elecraft] line out onK3

[Rick Bates]

Only to take care of the simpler (DOH!) mistakes, you know that the line OUT
is a stereo plug and that you'll only use the left side (channel) for the
main receiver audio (sub, if any is on the right)?  And that the line IN is
mono and uses the left side of the sound card output?

If the line out adequately drives some amplified speakers, it's either a
wiring issue or a linux issue.

Rick WA6NHC

-----Original Message-----
From: Neoklis Kyriazis
From: NK6A-Don Minkoff <cowchip at ca.rr.com>

To: n5b4az at yahoo.com 
Sent: Thursday, December 15, 2011 7:53 PM
Subject: line out onK3


Neoklis,

>Did anyone answer you?  I might be able to help. I use RTTY and
>digi modes all the time with my K3. Infact I have a y connector on
>the line out to use for a digital recorder during contesting. 


Hi, No reply yet, only yours. I tried CONFIG LINE OUT set to NOR
and varied the setting but no result. Also tried =PHONES and it
works just, with a very high volume setting. However now selecting
LINE OUT NOR seems to make no difference, don't understand why.

Pity, I was looking forward to improving my old digital comms 
programs and getting on the air after a long absence. But still no HF
antenna, only a 6m GP.


Regards

Neoklis - Ham Radio Call 5B4AZ
QTH Locator KM64KR
Website: http://www.qsl.net/5b4az/