[Elecraft] K3 "blur" was a no-show during ARRL 10m

[Jim Brown]

On 12/14/2011 5:42 PM, NZ0T wrote:
> Methinks that may be the source of the "mush" reports?

No. It's a very different problem, and is immediately recognizable once 
you've figured out what's going on. I used to experience this in Chicago 
to EU when I was using dipoles on 20M, and again here in Santa Cruz to 
EU even with a 3-el Yagi.  It will show up for an hour or two, then go 
away when one path becomes much stronger than the other.  When the two 
paths are within about 6dB of each other,CW is almost impossible to copy.

73, Jim K9YC