[Elecraft] KPA500 Heat Expansion Pop

[iain macdonnell - N6ML]

I don't think there are any 1/4 4-40 flat head screws in the K3
(either) ... ? There are 1/4 pan heads, but flat heads are 3/16 or
5/16 (IIRC)

    ~iain / N6ML


On Mon, Dec 12, 2011 at 9:04 PM, nr4c at widomaker.com <nr4c at widomaker.com> wrote:
> How about "spares" from the K3 kit?
>
> ...bc. nr4c
>
> Sent from my Verizon Wireless 4GLTE Phone
>
> -----Original message-----
> From: KD2A <rvread at verizon.net>
> To: elecraft at mailman.qth.net
> Sent: Tue, Dec 13, 2011 03:27:34 GMT+00:00
> Subject: Re: [Elecraft] KPA500 Heat Expansion Pop
>
> My amp has been "click" free for four days now. To clarify, page 22 Fig.27,
> is the area I'm referring to. Change the five 5/16" screws to 3/16" when
> mounting the Z-bracket on the PA/LPF module. I also would have preferred to
> use 1/4" screws but none come with the kit.
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/KPA500-Heat-Expansion-Pop-tp7082519p7088
> 611.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html