[Elecraft] noisy VFO's

[Ron D'Eau Claire]

That's something entirely new, Natan, and not normal for a K3. The pad
between the knob and the front panel should be nothing but a soft felt
washer, virtually noiseless as the knob turns. 

Is there anything else there?

If not, recommend that you drop an e-mail to K3support (at) Elecraft (dot)
com. You'll get a quick response. 

73,

Ron AC7AC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Natan Huffman
Sent: Tuesday, December 13, 2011 8:03 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] noisy VFO's

Hello All,

Last Friday I took delivery of a new K3 along with a P3 and lots of
accessories including Fred Cady's book on the K3.  Only problem to date is
"noisy" VFO knobs.  The technique to lessen drag does decrease or eliminate
the noise which sounds like fingernails dragged across a chalk board and I
do find that noise most objectionable.
Of course I can free myself of the noise by backing off the knobs but I'm
left with no noise, and no drag at all.  So my choices are no noise, or no
drag.  No drag leaves me with a
surprisingly free turning VFO knobs that is problematical and proper drag
leaves me with that horrible scraping which for me is simply intolerable.

Has anyone come up with this same problem and has found proper mitigation
solution?

Thanks,



Natan W6XR, C6AXR, VS6KR
Freeville, NY
______________________________________________________________