[Elecraft] N1MM with K-3

[Joe Subich, W4TV]

> While using N1MM the best answer seems to be to use a zero in the
> entry window or clicking on band bottom with the bandmap. However,
> this changes the CW REV to CW (using LSB tuning).

In N1MM ... Configurer -> Other check user Reverse CW Radio 1.

73,

    ... Joe, W4TV


On 12/11/2011 2:08 PM, Jim McCook wrote:
> On a recent post I discussed the need to use a memory to return to the
> bottom of a CW band without changing the SUB frequency.  While using
> N1MM the best answer seems to be to use a zero in the entry window or
> clicking on band bottom with the bandmap.  However, this changes the CW
> REV to CW (using LSB tuning).  For me this requires a hold of the ALT to
> return to what I think is normal (USB tuning).  I've never understood
> the desire to use LSB tuning, but I guess some folks like that method.
> I'm trying to figure out how to NOT change the CW REV by this method, or
> by changing the K-3 so normal CW mode is USB tuning like I think it
> should be.
>
> Any ideas?
>
> I still hope for an option for a memory to only affect the MAIN receiver
> and NOT THE SUB.  I also wish for the amplifier key line to be disabled
> when PTT is not activated.  This remains a huge flaw with me and with
> all my friends, especially those who use the lockout feature when
> running M/S.
>
> 73, Jim
> W6YA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>