[Elecraft] Shack equipment noise
Jim Wiley
jwiley at alaska.net
Sat Dec 10 21:02:29 EST 2011
May not have been your radio at all, but instead might have been a
"surge protected" multiple AC outlet box. I have a few Tripp-Lite
"Isobar" outlet boxes, and if they "catch" a surge, they will make a
VERY loud bang! Fooled me for a while until I figured out what was
happening. Sounds like some has let off a .22 rifle shot under the
operating bench. Dissipating the energy from a big surge take some
doing, and the result is often a very loud bang. Might that have been
what you heard?
- Jim, KL7CC
Keith Heimbold wrote:
> Wayne-
>
> I am a bit embarrassed about something that just happened in my shack because i think i just blew up my external 6m preamp.
>
> I was putting in line my six meter preamp and using a db15 Y connector with my Yaesu Quadra amp on the other connector. I was not transmitting and just getting it connected and then I heard a super loud pop.
>
> I disconnected eveything and then tested the transceiver and the amp. The K3 is fine but the amp was locked. I turned off the amp and restarted it and and it was fine. I reconnected the preamp and put the antenna in direct line with the K3 disconnecting it from the amp. The preamp when energizes reduces the signal strength. I think the pop came from the preamp. It is hard for me to isolate the noise source because I had my headset on. For sure it was working for about 20 seconds and then the pop occurred. It scared my dogs and myself it was so loud.
>
> I am not sure how I can test the preamp to see if it indeed blown. Any thoughts would be appreciated.
>
> Thanks,
>
> Keith
> AG6AZ
>
> Sent from my iPhone please excuse typos
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
More information about the Elecraft
mailing list