[Elecraft] Balun on tuner input?

[Alan Bloom]

If the balun is at the input, then there can be only one antenna
connected at the output.  I guess that's another reason to put the balun
at the output.

Alan N1AL


On Fri, 2011-12-09 at 05:07 -0500, Ken wrote:
> On Dec 8, 2011, at 10:51 PM, Alan Bloom wrote:
> 
> > The disadvantage of putting the balun at the input is that none of the
> > tuner circuitry can be grounded.  For example, the control shafts of the
> > variable capacitors have RF voltage on them, so the knobs must be
> > isolated.  
> 
> 
> If you have the balun on the input to the tuner, can you have ANY SO-239 outputs and still be balanced? Or it it limited to balanced line output ONLY (e.g. open wire or ladder line), no coax outputs?
> 
> Ken
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>