[Elecraft] No Voice

[W0MU Mike Fatchett]

You need to turn the bias on.  push the 2 button while setting the mic 
for front panel.

Mike W0MU

W0MU-1 CC Cluster w0mu.net


On 12/9/2011 8:59 AM, Natan Huffman wrote:
> Hello,
>
> Just received a new K3 and I can't seem to get it to transmit any of the
> voice modes.  I have done the following:
>
> Upgraded firmware as instructed, Verified both VFO's are on USB or LSB,
> enabled the Front Panel connector, Verified all CONFIG files.  Any other
> ideas to get SSB out of the K3/  CW works perfectly and I'm using a factory
> Elecraft microphone too and with the factory mic, I do not get anything at
> all.
>
> Any ideas?
>
> Thanks,
>
> Natan W6XR, C6AXR, VS6KR
> Freeville, NY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html