[Elecraft] Gap Hearit Speaker

[David Elliott]

If you have a high noise level, you might try the Pixel Loop (38 inches).  

http://www.pixelsatradio.com/product/shortwave-magnetic-loop-antenna/

This is very effective at reducing noise and interfaces well to the K3 thru the RX ant.

73 de W6BK


On Dec 7, 2011, at 2:56 PM, Bill Ross wrote:

> Hi to the group, 
> 
> I have a high noise level, besides living in an antenna restricted home. I usually run S5-8 noise on my K3 with the filters adjusted best I can, and bandpass >300-500 Hz. Someone has recommended the Gap Hearit Speaker to me as being so wonderful. I have been checking into it, and it appears as just another DSP and speaker ckt. So, I’m wondering if it would really make any difference to me, with the K3 and it’s internal DSP. 
> 
> I work mostly CW and due to my indoor antenna, with weak signals.  I also use phones mostly, but, I see you can plug them into this unit, so it shouldn’t make any difference phones or speaker, right?
> 
> Anyone have any experience with this product and can offer any advice, I’d appreciate it very much.  
> 
> Tnx & 73
> 
> Bill, k6mgo
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html