[Elecraft] How Can Memory access only VFO A?

[Cady, Fred]

I'll bet you can program a macro to do that but it would be band
specific.
The easy way to do it if you are running N1MM is to just enter a 0 in
the callsign window. That doesn't work for 17 and 12 because it takes
you to 18.000 and 24.000. In N1MM, any 1, 2 or 3 digit number entered in
the callsign window takes you that far above the bottom of the band. I
don't know about any of the other logging/rig control programs but I bet
they do the same.



Fred Cady
fredc at ke7x.com
"The Elecraft K3: Design, Configuration, and Operation"

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Ralph Parker
> Sent: Thursday, December 01, 2011 11:56 PM
> To: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] How Can Memory access only VFO A?
> 
> >I just do a quick A>B to store the DX frequency in VFO B and
> >continue tuning the band.
> 
> That's all well and good, but it doesn't address the problem.
> I know exactly what Jim is talking about - I also use the memory keys
> to
> get back to the bottom of the band, and have often wished there was a
> way
> to preserve the frequency B too.
> Maybe the programmer-in-chief will have an idea.
> 
> Ralph, VE7XF
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html