[Elecraft] W2

Sat Aug 27 15:17:53 EDT 2011

Dick answered the question of where the wattmeter usually goes, but note
that the KPA500 does *not* need an external output power monitor. That
monitoring is built into the KPA500 with both front-panel LED 'bargraphs'
showing the forward power and SWR simultaneously, and you can call up the
SWR and POWER on the KPA500's LCD if desired. 

That monitoring works to show the K3's output and SWR as well when the
KPA500 is in standby. 

Ron AC7AC

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil LaMarche
Sent: Saturday, August 27, 2011 9:42 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] W2

I purchased a W2, used, that came with two modules.  200 and 2000.  Do I
really need to monitor the K3's output?  Or, should I put the W2 at the
output of the KPA500.  Advice please.

Phil

Philip LaMarche

LaMarche Enterprises, Inc

 <mailto:Phil at LaMarcheEnterprises.com> Phil at LaMarcheEnterprises.com

 <http://www.lamarcheenterprises.com/> www.LaMarcheEnterprises.com  

727-944-3226

727-937-8834 Fax

727-510-5038 Cell 

  <http://www.w9dvm.com/> www.w9dvm.com

K3 # 1605

KPA500 # 029

P3 #1480

 CCA 98-00827

CRA 1701

W9DVM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html