[Elecraft] K3 Auto antenna switching

[Cady, Fred]

HI Ed,
You should be able to go into CONFIG: DIGOUT1 and then step through the
bands to map out DIGOUT1 ON or OFF. It doesn't require the KAT3. 
73,
Fred


Fred Cady
fcady at ieee dot org 
"The Elecraft K3: Design, Configuration and Operation"
www.ke7x.com


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Edward R. Cole
> Sent: Thursday, August 25, 2011 12:01 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Auto antenna switching
> 
> I was looking at the ACC features and have a question about
> DIGOUT1.  Does this feature have any use without the KAT3?  I wonder
> if there is map for its output states by band (or how one does this -
> it would be handy for me to use this for 6m-eme to enable INHIBIT
> when on 6m).  I currently use BAND0 enable INHIBIT for my other
> VHF/UHF bands (the HI biases a NPN relay driver in my station control
> box).
> 
> 
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
> DUBUS Magazine USA Rep dubususa at gmail.com
> ======================================
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html