[Elecraft] Pre-set power levels

[Len Chesler]

Thanks to all of you on the reflector who took the time to provide information relating to the pre-set power levels between my K3 and KPA500.  Tnx to Guy, W2AV for pointing out that the aux cable may not be seated properly in the Aux port or a potential bent pin.  He was right!!  I inspected the connection at the K3 and found one of the pins on the connector bent and not making proper contact.  I straightened the pin and carefully made the connection to the K3.  Now the pre-set power levels are functioning perfectly (nice touch Elecraft), and I am able to make band changes from either the K3 and KPA in concert.  I'm a happy camper!
Best 73
Len, K6LEN