[Elecraft] Hi Cur

[Don Wilhelm]

Scott,

Was that on a K2 or a K3?  Please indicate in both the subject and the text.

Put a dummy load between the radio and the dummy load.  Tune into the 
dummy load.
After the TUNE completes, set the power to 40 or 50 watts and hold the 
key down for about 5 seconds.
Tell us how much power is actually being developed.

73,
Don W3FPR

On 8/19/2011 12:31 AM, Scott Weiss wrote:
> Hello to all,
>    Need some help. After finishing up on 80 cw last night I moved up to 20, hit the auto tuner for the beam and received HI CUR. And this only ocurred on 20 even with a Dummy Load attached. Msg seemed to go away once I reduced the wattage down around 60 watts. Hepl!!!
>                      73's,
>                     Scott N2WF
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>