[Elecraft] Changing DATA-A modes with Memory Editor

[Edward R. Cole]

"I have a problem Houston"!

I've tried to program my memory channels for DATA-A mode to reflect a 
change in DATA MD, and its not taking it.

I re-programmed the memory in question to CW mode to clear the memory 
mode and uploaded it to the K3 successfully,.  Next I selected the 
memory on the radio using M>V button and rotating VFO-A.  Then I 
changed mode from CW to DATA-A and DATA MD to the sub mode I want to 
program.  Then I change the mode in Editor from CW to DATA-A and 
select that memory ID and Send Selected.  DATA-A is saved but not the 
DATA-MD that I wanted.  Every time I send from the Editor is puts 
AFSK A on LSB with 45bps bw.  The only DATA mode I want to use is DATA-A USB.

The editor is writing to the K3 because I see the activity deleting 
and writing.  It is connected with the same COM$ that I use for the 
K3 Utility program which runs properly.

I even upgraded Editor to vers. 1.0.203.0 which is the current 
version available on the Elecraft website.

So what is the secret "handshake"?  Right now I am suspecting the K3 
cpu is in league with Bill Gates and "resistance is futile"!


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
DUBUS Magazine USA Rep dubususa at gmail.com
======================================