[Elecraft] Using GM-5 Mic with K2

[Joe Subich, W4TV]

> I would like to know if the CC1-K cable connects the 5v on pin #6
> from the K2 to pin #6 on the GM-5 creating an unwanted bias.

No.

> There is a 4 pin mic connection on the CC1-K the GM-5 plugs into.
> Does one of these 4 pins supply bias to the GM-5?

No.  The fourth pin is PTT.

73,

    ... Joe, W4TV


On 8/16/2011 4:06 PM, Roy Morris wrote:
> I would like to know if the CC1-K cable connects the 5v on pin #6 from the
> K2 to pin #6 on the GM-5 creating an unwanted bias.  There is a 4 pin mic
> connection on the CC1-K the GM-5 plugs into.  Does one of these 4 pins
> supply bias to the GM-5?  Thanks,   Roy  W4WFB
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>