[Elecraft] XG3 and KUSB (old)

[Guy Olinger K2AV]

Make sure that using the Prolific device that the OS is assigning the
same COM port number you think it is.  It most likely will stubbornly
assign different COM numbers for the two devices.

73, Guy.

On Wed, Aug 10, 2011 at 9:30 PM, Dick Dievendorff <dieven at comcast.net> wrote:
> I use my original KUSB with an XG3.  The XG3 Utility was developed and
> tested with one of the early KUSB devices. I'm using Windows 7 64-bit.
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil & Debbie Salas
> Sent: Wednesday, August 10, 2011 6:16 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] XG3 and KUSB (old)
>
> So I have an interesting issue.  I can talk to my XG3 with an FTDI
> USB/serial adapter.  But I can't talk to it with my old KUSB serial adapter
> (which I still use with my K3).  The old KUSB is a Prolific device.  I did
> verify I have the latest drivers.  Not that big a deal, but wondered if
> anyone can talk to the XG3 with a Prolific device.
>
> Phil - AD5X
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>