[Elecraft] K3 memory

[Dick Dievendorff]

I've had several reports of VFO B not being "honored" using the frequency
memory editor.  I've looked and don't see what I might have done to cause
this.  

Can you try this:  Enter a memory manually, with different frequencies VFO A
and B, and see if it switches with M-->V as it should?  Then read the
memories from the K3 into the frequency memory editor. Save the memories in
a file, and send me the .xml file for those memories and tell me which
memory works and which you entered manually and whether or not that works.

Thanks!

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of David Windisch
Sent: Wednesday, August 10, 2011 6:45 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 memory

Hi, all concerned:

I've been using v4.39 firmware for a while.

In a prior fw version, at least a year ago, using the K3 MemEd, I programmed
in, eg, vfo A=7000.00  and vfo B=7030.00,  so I can use the M>V button as a
bandswitch, and scan from A to B.  Worked fine afterwards.  Didn't have a P3
then; this was a simple workaround.

Been using a P3 and bandswitching with the BAND button since, and just now
noticed that the M>V function doesn't pick up the vfo B memory setting any
more when I tried it.

Read the memories with the MemEd; all As and Bs were as I set them; resent
them anyway; still no vfo B pickup.

Have I botched something up?

Brgds,
Dave, N3HE

--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-memory-tp6672414p6672414.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html