[Elecraft] VGA Cables (mate to K3-ACC Jack)

[Don Wilhelm]

Ed,

If those are VGA cables, all the conductors may not be independent.  A 
standard VGA cable connects several pins together.
For use with the K3, all pins must be independent.
I bring this up only because you referred to them as VGA cables.

73
Don W3FPR

On 8/10/2011 1:37 AM, Edward R. Cole wrote:
> I'm wondering if there is any interest from K3 owners for obtaining
> 15-pin VGA cables which directly mate to the K3 ACC jack?  I have 40
> NEW six-foot commercially-made cables with molded VGA-male connectors
> on each end.  If there is enough interest we would offer them thru
> e-bay in single quantities. I'm not going to quote a price unless
> there is interest in them.
>
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
> DUBUS Magazine USA Rep dubususa at gmail.com
> ======================================
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>