[Elecraft] Restore Digital Voice Recorder key functions

[Cady, Fred]

Thanks Roger. If you get there before the end of the week there is a 20%
discount. (SINK305)

Fred Cady
fcady at ieee dot org 

> -----Original Message-----
> From: Roger Dixon [mailto:lists at irdixon.plus.com]
> Sent: Tuesday, August 09, 2011 10:04 AM
> To: Cady, Fred; Elecraft at mailman.qth.net
> Subject: RE: [Elecraft] Restore Digital Voice Recorder key functions
> 
> Hi Fred,
> Brilliant !!!!  If you had given me a million years I wouldn't have
> guessed
> that solution!  I'd been delaying purchasing your book - now I'm sold.
> 
> Thanks
> Roger
> 
> -----Original Message-----
> From: Cady, Fred [mailto:fcady at ece.montana.edu]
> Sent: 09 August 2011 16:42
> To: Roger Dixon; Elecraft at mailman.qth.net
> Subject: RE: [Elecraft] Restore Digital Voice Recorder key functions
> 
> Hi Roger,
> 
> Sounds like the M1 key got programmed to activate the Config menu 2
> Tone.
> You can try to recover the messages keys by the following:
> 
> 8.3.4	Message Memories and Programmable Function Keys
> As Section 8.1.1 above describes, M1 - M4 and M1 - M4 can be used
> programmable function keys and macro keys. When they are, you cannot
> use
> them for message keys, but any pre-recorded messages saved for these
> keys
> can be recovered.
> 1.	Switch to CW mode.
> 2.	Tap REC.
> 3.	Then tap the buffer you would like to restore (M1 - M4).
> 4.	Then tap REC again.
> 5.	Switch back to SSB mode.
> Once you have done this, M1 - M4 and M1 - M4  are restored to playing
> and
> repeating messages.
> 
> (From page 208, "The Elecraft K3: Design, Configuration, and
> Operation").
> 
> 
> Fred Cady
> fcady at ieee dot org
> " The Elecraft K3: Design, Configuration, and Operation"
> www.ke7x.com
> 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> > bounces at mailman.qth.net] On Behalf Of Roger Dixon
> > Sent: Tuesday, August 09, 2011 7:40 AM
> > To: Elecraft at mailman.qth.net
> > Subject: [Elecraft] Restore Digital Voice Recorder key functions
> >
> > During a recent contest some random sequence of key presses managed
> to
> > turn the DVR M1 button into a two-tone generator on/off button.
Nice
> > feature - but not required!
> >
> > Is there an easy way to restore the M1 key functionality?
> >
> > Roger - G4BVY
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this
> email
> > list: http://www.qsl.net/donate.html