[Elecraft] Restore Digital Voice Recorder key functions

[Cady, Fred]

Hi Roger,

Sounds like the M1 key got programmed to activate the Config menu 2
Tone.
You can try to recover the messages keys by the following:

8.3.4	Message Memories and Programmable Function Keys
As Section 8.1.1 above describes, M1 - M4 and M1 - M4 can be used
programmable function keys and macro keys. When they are, you cannot use
them for message keys, but any pre-recorded messages saved for these
keys can be recovered.
1.	Switch to CW mode.
2.	Tap REC. 
3.	Then tap the buffer you would like to restore (M1 - M4).
4.	Then tap REC again. 
5.	Switch back to SSB mode.
Once you have done this, M1 - M4 and M1 - M4  are restored to playing
and repeating messages.

(From page 208, "The Elecraft K3: Design, Configuration, and
Operation").


Fred Cady
fcady at ieee dot org 
" The Elecraft K3: Design, Configuration, and Operation"
www.ke7x.com

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Roger Dixon
> Sent: Tuesday, August 09, 2011 7:40 AM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] Restore Digital Voice Recorder key functions
> 
> During a recent contest some random sequence of key presses managed to
> turn
> the DVR M1 button into a two-tone generator on/off button.  Nice
> feature -
> but not required!
> 
> Is there an easy way to restore the M1 key functionality?
> 
> Roger - G4BVY
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html