[Elecraft] Rear Panel Mic help ple
iain macdonnell - N6ML
ar at dseven.org
Sat Aug 6 16:46:41 EDT 2011
Hi Ed,
I used an XLR - to - 1/4" cable that came with another mic, and a 1/4
- 1/8" adapter, for the quick test. Pin 2 on the XLR is connected to
the "tip". and pins 1 and 3 are both connected to the shield.
I don't know about the Flex - if it's really TRS, then maybe the Flex
has a balanced mic input? The K3 input is unbalanced ("mono"
connector),
73,
~iain / N6ML
On Sat, Aug 6, 2011 at 8:31 PM, Ed Stallman <n5dg at airmail.net> wrote:
> Iain , thanks for your input , I did look to be sure and I am plugged into
> the Mic in the back ... Using the XMIT and monitoring the ALC with Mic Gain
> at 60 , I get one bar on the alc meter...I was using this Microphone and
> cable on a Flex 5K , Is the TRS plug wired the same ?
>
> Ed
>
>
>
>
> IainAt 03:08 PM 8/6/2011, you wrote:
>
> Hi Ed,
>
> Something is definitely not right there. I happen to have a PR-781 in
> my closet (it's for sale, if anyone's interested - I only use headsets
> now). I plugged it into my K3's rear input and configured:
>
> MAIN:MIC-SEL: rP.H
> MIC: 10
> MAIN:VOX GN: 040
>
> and it works great, with 5-7 bars on the ALC meter on voice peaks,
> without yelling.
>
> What are you seeing on the ALC meter? Try without VOX first, and make
> sure you're getting those 5-7 bars (use the XMIT button if you don't
> have an external PTT source).
>
> Any chance you plugged yours into the line input instead of mic?
>
> 73,
>
> ~iain / N6ML
>
>
>
> On Sat, Aug 6, 2011 at 7:32 PM, Ed Stallman <n5dg at airmail.net> wrote:
>> I' m trying to use a Heil PR 781 microphone on the K3 rear Mic jack
>> . With the settings I'm using now , I must scream into the Mic for
>> radio to transmit
>>
>> Here are my settings.
>>
>> Main:MIC-SEL I have set to RP, then taping the 1 sets to RPH
>>
>> MIC GAIN = 60
>>
>> VOX GAIN = 100
>>
>> BIAS = OFF
>>
>> ANTI-VOX = 0
>>
>> DELAY = 5
>>
>> VOX = on
>>
>> Maybe the PR-781 is not a good choice or most likely I've missed a setting
>> ?
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
More information about the Elecraft
mailing list