[Elecraft] Fw: K3 DATA A help needed

[Paul Milward]

tnx Greg
vox gain was low, 2 or 3, unfortunatly I did not register it before I made a 
change. wow is it sensitive vox gain needs to be at 5 to transmit but at 6 ALC 
goes wild, should be interesting going forward
Paul




________________________________
From: Greg <ab7r at cablespeed.com>
To: Paul Milward <nu4c at bellsouth.net>
Cc: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: Fri, August 5, 2011 2:25:17 PM
Subject: Re: [Elecraft] K3 DATA A help needed

Paul
Double chk mic sel is still set to line in and then check ur vox gain level. 
 For line level audio the vox needs to be very high.

73
Greg

On Friday, August 5, 2011, Paul Milward <nu4c at bellsouth.net> wrote:
> Hi
> I moved my laptop computer offsite for a few hours this morning. On return I
> reconnected the stereo cables from I/O on the K3 to the I/O on the laptop.
> Everything worked flawlessly prior to the move for PSK operation. The rig 
still
> receives and the laptop still decodes signals...but the Rig will not transmit
> when the software/soundcard is activated. I have the K3 set to DATA A and VOX 
>is
> engaged. I did not change anything on the radio or in the soundcard software. 
I
> am using DIGIPAN 2.0.
> I did contact my ISP this morning prior to moving the laptop offsite. I had an
> issue connecting to the internet and we, the ISP phone tech and I, reworked
> passwords for network access and email. I deleted Temporary Internet files,
> cookies and history at his direction. But no changes were made to sound card
> settings.
> Any suggestions? I really want my PSK fix. Any help appreciated.
> Paul, NU4C
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>