[Elecraft] T1 Operational Temperature Limits?

[GeorgeP1111]

I'm just about ready to put up a 44' Doublet and feed it with 300 ohm Twin
Lead.  I'm going to connect the Twin Lead to a balun and the T1 at the base
of the Doublet mast and run about 35' of RG213 back to the shack and my
FT-817ND (soon to be a KX3).

I was wondering if the T1 could withstand the cold temperatures we get here
in Minnesota.  I wrote Elecraft Support asking if there were any specs or if
they thought a temp of -30 to +100 F would cause any problems.  Dale
responded, "We do not have any real information on what the temperature
limits are, so we suggest you post on the reflector and ask for input from
other T1 users who have over the years had T1's out in varying environmental
conditions."

Any "Snowmen" out there?

Also.... I'll be needing a BL2 balun so if someone has one they don't
need/use, drop me a note off list.

tnx
de George
WD0AKZ

pasek001 at umn.edu


--
View this message in context: http://elecraft.365791.n2.nabble.com/T1-Operational-Temperature-Limits-tp6643567p6643567.html
Sent from the Elecraft mailing list archive at Nabble.com.