[Elecraft] [K-3] RTTY for Dummies

[Wes Stewart]

Or forget the serial cable and run VOX.

--- On Tue, 9/28/10, Bill Conkling <nr4c at widomaker.com> wrote:

> From: Bill Conkling <nr4c at widomaker.com>
> Subject: Re: [Elecraft] [K-3] RTTY for Dummies
> To: "'Tom Meier'" <tomk7zz at gmail.com>, elecraft at mailman.qth.net
> Date: Tuesday, September 28, 2010, 5:25 PM
> I went to the web site run by AA5AU
> and checked his RTTY page.  All you ever
> wanted to know about RTTY, but were afraid to ask.
> 
> Now for the K3.  I used MMTTY software, and use the
> serial cable for rig
> control and PTT.  I had to tell MMTTY that I was using
> SOUND card for TX.
> 
> Set the K3 mode to DATA, and the data mode to AFSK A and 45
> baud.  Connect
> your sound card to the radio in/out jacks and you are ready
> to rock-n-roll.
> 
> ...bc  nr4c
> 
> -----Original Message-----
> From: Tom Meier [mailto:tomk7zz at gmail.com]
> 
> Sent: Tuesday, September 28, 2010 5:32 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] [K-3] RTTY for Dummies
> 
> Has anyone got a *reallly simple* checklist for setting up
> the K-3 to run
> RTTY.  I'll use MMTTY and I'll use AFSk and I will
> *not *use an outboard
> interface like Rigblaster, etc.  I mean really simple
> as in Step 1: Turn on
> the radio.
> 
> 73 de Tom (K7ZZ)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>