[Elecraft] K2 -- KAT2 Question - Disregard

[stan levandowski]

Sorry, folks, the instruction manual clearly stated "BAR graph" and when 
I switched to it everything worked just fine!!

Elecraft - 1; WB2LQF - 0



Stan Levandowski WB2LQF
HF QRP CW -- Doing more with less for over 50 years!
QCWA #35038   OOTC #4558   NAQCC #4740   SKCC #6488   FISTS #14992


On Mon, Sep 27, 2010 at 6:21 PM, stan levandowski wrote:

> I just finished my KAT2 for my K2 #6980.  According to p. 19 of the 
> instructions, my KAT2 is supposed to automatically reduce power to 3 
> watts if my power control is set higher during the autotune, if my 
> firmware revision is higher than 1.05 on the K2 Main Microcontroller. 
> My firmware is Revision 2.4.
>
> But it doesn't look like the KAT2 is reducing power during the 
> autotune.
>
> Just wondering if anyone else has experienced a similar situation.  No 
> big deal; I can just do it myself, but thought I'd ask.
>
> Other than the above, the KAT2 seems to be working very, very well 
> especially since it was able to resolve a 12:1 SWR on a 40 meter 
> dipole that was resonant on 6.6 mHz.  Don't ask...that's another 
> story.
>
>
>
> Stan Levandowski WB2LQF
> HF QRP CW -- Doing more with less for over 50 years!
> QCWA #35038   OOTC #4558   NAQCC #4740   SKCC #6488   FISTS #14992
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html