[Elecraft] K3 CW Sidetone

[The Smiths]

Is it also possible that you're turning off your rig by shutting off the power TO the rig without using the Power "off/on" button (I.E. Just turning off the power supply).  I belive that you have to save the settings at least ONE time by doing a proper shut down on the K3, and not just killing power to the rig.  I've found settings get lost if you don't.  Just an idea.
Like a computer, you can't just "Crash" it when you're ready to stop using it.
 
> From: n6kr at elecraft.com
> To: keith at lamonica.com
> Date: Sun, 26 Sep 2010 09:08:38 -0700
> CC: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 CW Sidetone
> 
> Keith,
> 
> This shouldn't happen. I test this on every firmware release, and just 
> tested it again. Enter CW mode, then hold the SPEED/MIC/MON knob in to 
> bring up sidetone MON level, then adjust it. Tap the knob to return to 
> normal operation. Changing modes and possibly readjusting the MON 
> level for that mode should have no effect on the sidetone level.
> 
> If this isn't working, please contact k3support on Monday.
> 
> 73,
> Wayne
> N6KR
> 
> 
> On Sep 26, 2010, at 8:56 AM, Keith Lamonica wrote:
> 
> > Can the sidetone monitor level be set to a fixed level? Mine 
> > defaults
> > to 4 when I change modes and then come back to CW.
> >
> > Keith, W7DXX Remote
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html