[Elecraft] FW: Help with RTTY

[Tommy Alderman]

Sorry Barry - this should have gone to the reflector!


-----Original Message-----
From: Tommy Alderman [mailto:aldermant at windstream.net] 
Sent: Sunday, September 26, 2010 2:06 PM
To: 'Barry'
Subject: RE: [Elecraft] Help with RTTY

I got caught by that Friday night! Could not understand why I could not get
very many answers - the Q rate stayed below 60/hr. Then I discovered the
baud rate had defaulted to 75 baud!! Just in the nick of time because I was
about ready to move the K3 to the floor and put my IC-7700 back on the desk.
I would urge the default FSK-D be defaulted to the standard 45 baud rate as
there is only one contest (that I know of) that wants RTTY run at 100 wpm! 
The rate then improved - significantly- then John made his post about using
the P3 and all the lights came on! John's post was a tremendous help for me.

Set the FSK-D default to 45 baud -- PLEASE!

73,
Tom - W4BQF


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Barry
Sent: Sunday, September 26, 2010 12:56 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Help with RTTY


I know this is a little late for the contest, but if you're using the RTTY
decode within the K3, it defaults to 75 baud (100 WPM).  You need to change
that to decode 60 WPM, which is the standard.
-- 
View this message in context:
http://elecraft.365791.n2.nabble.com/Help-with-RTTY-tp5568816p5572320.html
Sent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html